Description

Wood pellet making machine, biomass 150mm - MKFD150C

The particularity that stands out the most in the MEELKO machines, which no competitive company can achieve is that they can pellet wood of any type without any binder or prior treatment.

Any wood without the need to add anything other than sawdust, manages to make pellets directly. This series of machines usually have a lower yield than the machines for balancing, but the compaction is optimal, the friction and temperature is around 90 degrees Celsius and the working time can be all day without stopping production.

Wood and any biomass with a view to fuel can be processed, it must be taken into account that these machines are in their work parts as matrix and pressing rollers, specially designed for these high-pressure materials, the structure of the machine is similar to the others, but it changes its parts of work.

When the pellets are produced they leave the hot part of the nozzle, it will be necessary to ventilate before collecting or bagging.

These machines can be placed in line and expand the unlimited capacity of equal machines working in parallel with a shared power.

The sawdust in its optimal state needs to have no more than 13% humidity and a particle of no more than 1mm. If it is a chip it will be necessary to process it first in a hammer mill and then make the wood pellets.

On pelletizing machines for concentrated cores.

All our machines have a regulating stop to give the desired length to the pellets.

SAFETY ATTENTION.

2.2 kW engines up to 5.5 kW have direct start with thermal jump key suitable for consumption in amperes of each motor.

All models of our machines that work with electricity with more than 5.5kW, have the correct electromechanics and adequate to the required power.

With triangle star start, we managed to protect the motor from overloads during ignition, we protect the user's electrical installation because it will not have excessive consumption peaks, and low energy costs when paying for electricity.

With the motor saver we protect the operator from any accident and the equipment from any overload generated by accidents such as the fall of some foreign object inside.

With the general stop button by fist bump we protect the user and the equipment.

With the phase control, we protect the equipment that cannot be working with the lack of an electrical phase so that the motor is not damaged.

With the amperage and voltage control the user can see in real time how the equipment is working and the consumption in order to detect irregular jobs.

Motors of more than 22kW are composed of panels that have the same safety standards, only in some cases it has a soft start or adjustable frequency drive with a starting ramp.

Composite cabinets made of epoxy painted steel sheet included in international CE standards.

The machines are made in its high strength modular cast iron structure, and its steel parts are tempered in high temperature in SAE quality that give it a high service life.

The painting and the visual completion of the machine is carried out in a temperature-painted booth, with a base of sandblasting, phosphate treatments so that moisture is not trapped and eventually rust with the rust.

Maintenance.

All the machines we manufacture are designed with the simplest structure so that the user can perform service and maintenance without relying on any third party or that causes costs. Periodically you need greased parts with bearings only, and once a year change oil in the gearbox.

Spare parts and spare parts.

All the parts of our machine are manufactured by MEELKO that is to say that the buyer has access without problems to any type of spare parts directly from the manufacturer.

Warranty.

The structure of the machine is guaranteed for 3 years from the date of purchase.

The parts manufactured by MEELKO comprised of shafts, rollers, dies are guaranteed for 12 months due to manufacturing or material defects.

Features:

Capacity: 60/90 kg / h

Power 5.5 kw (3 phase)

Package weight: 115 kg

Package size: 800 * 350 * 740mm

(0.2072cbm)

Inside the box we will send: Flat die extractor, Tool kit for maintenance and assembly use, manual greaser.